Need a quick stocking that is fully lined? We've got you covered!
The Stocking
Download the free pattern below. Tape the
pieces together and cut out two sets of stocking pieces, one for the stocking
and one for the lining.
Embroider as desired. Add a Christmas design (70% off), monogram,
or name.
Trim stabilizer
close to the design on the back side of the stocking material.
Place stocking and lining pieces right sides
together and sew/serge around the outside leaving the top open.
Turn the
stocking right side out and leave the lining inside out. Trim seam allowances
and clip curves, if necessary. Insert the lining inside the stocking, wrong sides
together.
The Cuff
Cut cuff material 21.5“ x 10.5“. With right
sides together, sew/serge the short ends together to create a tube.
If you are stitching a name on the cuff, do it
before joining the cuff seam.
When embroidering on fabrics with a nap or
pile, use a water-soluble topper to keep stitches from sinking out of site.
Fold the cuff in half, right sides out,
matching raw edges.
Place the cuff inside the stocking lining,
lining up the center seam with that of the stocking and matching all raw edges
the whole way around the top.
Pin in place and serge/sew together around the
top of the stocking.
Pull the cuff out from inside the stocking and
fold down over the top of the stocking to cover the seam and form the cuff.
Attach a hanger and it’s good to go!
Wishing you a Merry Christmas and a blessed new year!
Debbie SewBlest
stocking_images.zip (77.4KB)