So, stabilizing. I have to admit that it’s something with
which I haven’t had many problems. When I got my first embroidery machine, a
Brother 7000, the gal in the shop just slipped a piece of stabilizer under the
hoop. Until I learned better from fellow embroiderers on the Internet that’s
the way I did it too. Not being familiar with special embroidery threads, I
also used regular sewing thread. I did a lot of things I would never even
consider doing today but, surprisingly, those items didn’t look bad, at least
to my “unschooled” eyes.
There’s lots of advice about stabilizing in books and
magazines and on many embroidery web sites. I can only tell you what I usually
do and my methods might not work for you. First of all, you have to accept that
embroidery designs are not one size fits all. A large, dense design will not
stitch out nicely on a silk blouse no matter what you do. Conversely, small,
light designs just won’t work on terry toweling. Stabilizers are also not one
size fits all. I have a very heavy stabilizer; my friends refer to it as my
linoleum tile stabilizer. I use it rarely, but sometimes I’m doing a large
design on a sweatshirt and I need it. In that case I the stabilizer, spray it
with temporary adhesive, smooth down the sweatshirt, lightly spray a clear
wash-away topper with temporary adhesive and smooth that on top of the pile.
For very lightweight fabrics, I hoop a very lightweight
stabilizer, sometimes more than one layer, spray and stick. As you may have
noticed, I rarely hoop any garment or fabric. When I do hoop fabric, I spray
the stabilizer, smooth the fabric over it, lay the outer hoop on a stable
surface, lay the stabilized fabric over it, then lay the inner hoop on top and
push down firmly with both hands. I do not pull or stretch the fabric. In fact,
I hoop plain stabilizer the same way. Laying over the outer hoop and pushing
down the inner hoop firmly with both hands. I think that pulling on hooped
fabric and/or stabilizer can cause puckering around the design when the fabric
is released from the hoop and springs back to its original size. As for felt,
well, felt is VERY stretchy. Definitely stick it down.
I do use a lot of sticky stabilizer. I stick it right to the
back of my hoop and up the outside. I know you’re supposed to hoop the
stabilizer and then carefully remove the paper backing from the design area. In
my experience the paper backing is slippery and may move around in the hoop. I
like everything nice and, well, stable. Yes, the hoop gets messy. Sometimes I
squirt it with Goo Gone, apply a scrubby and then wash with soap and water or
put it through the dishwasher. Usually I toss it in a drawer so my messy hoop
can be my little secret.
I don’t know if I’ve helped at all, but I hope knowing how I
do things, even if unorthodox, helps a little.
Until next time, I wish a splendid 2014 to you all,
Ann (used to be the gran)